Lbl-lighting Calix 7-Light Bedienungsanleitung PDF herunterladen (Seite 3)

POWER

CORD

STRAIN

RELIEF

SET SCREW

Loosen the 2 set screws on the strain(Do Not Remove)

relief.

Pull the power cords through the strain relief to the

desired length and re-tighten the 2 set screws.

Leave at least 6” of cord in the back of the canopy for

wire connections and trim off the excess cable.

From the end of the cord, strip the insulation 4" using a

sharp knife. .Make sure not to nick the inner wires

Strip the end of the wires.

Reconnect the power cord wires to their original

connections to the driver (reversal of 2A).

Install the Canopy

Ground the fixture to a suitable ground in accordance

with local electrical codes.

Connect the white driver wire to the neutral power line

wire.

Connect the black driver wire to the hot power line

wire.

POWER

CORD

DRIVER

1 2 3 4

Keine Kommentare

Lbl-lighting Calix 7-Light Bedienungsanleitung Seite 3