Lbl-lighting Standoff Ball Joint Assembly Bedienungsanleitung PDF herunterladen

Installation Instructions for

Telescoping Rigid Standoffs with Ball Joint

1.0

HANGER-ADJ-_-2-BJ

980MR2VTSP

Installing the Standoff

ANCHOR

Select a location on the sloped ceiling where the Monorail is to

be mounted.

One way of marking the standoff locations on the ceiling is to

lay the Monorail on the floor underneath of the selected

location and by using a plumb bob pointing on the center of

the Monorail mark the points on the sloped ceiling.

The other way is to hold the Monorail directly against the

sloped ceiling and mark the standoff points on the ceiling.

Tap the anchors at the marked points up to the threaded

portion with a hammer.

Screw the anchors in the rest of the way with a Phillips

screwdriver.

Insert the #8 screw into the threaded nipple and washer.

Tighten the #8 screw completely into the anchor to secure the

washer and threaded nipple in place.

Repeat steps 4 through 6 for the remaining standoffs.

CEILING

GP I :ENERAL RODUCT NFORMATION

This product is suitable for indoor dry locations only.

This product must be used with LBL Monorail system only.

This instruction is for the following models:

Monorail Support 2.5" - 4" (HANGER-ADJ-_1-2-BJ)

Monorail Support 6" - 10" (HANGER-ADJ-_2-2-BJ)

Monorail Support 12" - 24" (HANGER-ADJ-_3-2-BJ)

Monorail Support 24" - 48" (HANGER-ADJ-_4-2-BJ)

Monorail Support 48" - 96" (HANGER-ADJ-_5-2-BJ)

#8 SCREW

THREADED NIPPLE

WASHER

2-Circuit Monorail

1B1C

1 2 3 4

Inhaltsverzeichnis

Seite 1 - Installing the Standoff

Installation Instructions forTelescoping Rigid Standoffs with Ball Joint1.0HANGER-ADJ-_-2-BJ980MR2VTSP1Installing the StandoffANCHORSelect a location

Seite 2

2BALL JOINT POSTLoosen the M4 set screw on the ball joint(Do Not Remove)post with the 2 MM Allen wrench provided and remove thesupport post.2 MM ALLEN

Seite 3 - HOUSING CAP

3Adjust Standoff Height (Optional)Slightly loosen the M3 set screw on the(Do Not Remove)side of the telescoping post with th 1.5 MM Allen wrenchprovid

Seite 4 - SAVETHESE INSTRUCTIONS!

Kommentare zu diesen Handbüchern

Keine Kommentare

Lbl-lighting Standoff Ball Joint Assembly Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Beleuchtung Lbl-lighting Standoff Ball Joint Assembly herunter. LBL Lighting Standoff Ball Joint Assembly User Manual [de] Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Beleuchtung Lbl-lighting Standoff Ball Joint Assembly