Lbl-lighting Fiona WD Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Beleuchtung Lbl-lighting Fiona WD herunter. LBL Lighting Fiona WD User Manual Benutzerhandbuch

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 2
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 0
Install the Fixture
1A
Wall
1B
CAUTION - RISK OF FIRE
This product requires installation by a qualified
electrician. Before installing be sure to read all
instructions and TURN THE POWER TO THE
ELECTRICAL BOX OFF.
CAUTION - RISK OF FIRE
This product requires installation by a qualified
electrician. Before installing be sure to read all
instructions and TURN THE POWER TO THE
ELECTRICAL BOX OFF.
CAUTION - RISK OF FIRE
This product requires installation by a qualified
electrician. Before installing be sure to read all
instructions and TURN THE POWER TO THE
ELECTRICAL BOX OFF.
GENERAL PRODUCT INFORMATION:
This product is suitable for damp locations.
This product can mount either to a 4” square electrical box with a
round plaster ring or an octagon electrical box.
This product can be dimmed with a low-voltage electronic dimmer.
This instruction shows a typical installation.
THUMB SCREW
THUMB SCREW
LED PLATE
To gain access to the mounting plate holes, remove the
two thumb screw to temporarily loosen the plate
holding the LED lamp.
1
DRIVER
62
63
Connect the mounting plate ground wire to a suitable
ground in accordance to local electrical codes.
Connect the white driver wire to the neutral power line
wire with a wire nut.
Connect the black driver wire to the hot power line wire
with a wire nut.
64
1
4
3
2
Installation Instructions for
Fiona Wall (LED)
980FIONAWD
1.0
LW681_LED
Seitenansicht 0
1 2

Inhaltsverzeichnis

Seite 1 - Fiona Wall (LED)

Install the Fixture1AWall1BCAUTION - RISK OF FIREThis product requires installation by a qualifiedelectrician. Before installing be sure to read allin

Seite 2 - Install the Shade

Install the Shade2ASlide the shade into the slots on the backplate.Align and center the shade to the mounting clips onthe mounting plate.Mount the sha

Kommentare zu diesen Handbüchern

Keine Kommentare